JEDEC has previewed DDR6 with plans for higher data rates, a wider data bus and a shorter module design, according to Wccftech’s November 18 report. The next-generation memory standard remains in development, so keep the upgrade shopping list in the drawer for now. Source
The report puts the planned starting data rate for registered memory modules (RDIMMs) at 12.8 GT/s, or 12.8 billion transfers per second. The roadmap extends to 14.4 GT/s and beyond. These figures shouldn’t be read as guaranteed speeds for future desktop memory kits. Source
More bandwidth, not magic
Wccftech lists a planned expansion from 64 to 96 data lines (DQ)—a 50% increase in data-bus width. Higher data rates and the wider bus are intended to increase bandwidth by more than 50% at introduction. The report doesn’t specify the comparison configuration. Source
Your software hasn’t signed a contract to run 50% faster just because the memory can move more data. Source
A 74mm module design
Wccftech describes a 74mm DDR6 module design, compared with 133mm for DDR5. The shorter design is intended to help fit more memory into a given space. The report doesn’t establish dimensions for every eventual DDR6 form factor. Source
Capacity plans include support for memory dies (individual pieces of silicon) up to 128Gb and stacking optimizations intended to fit more memory into each package. That lowercase b is doing important work: the figure is in gigabits and describes an individual die, not a finished 128GB memory module. Source
Wccftech also reports a goal of better performance per watt through memory-interface changes and data-center-focused low-power modes, but gives no measured gain. Source
Intended uses range from AI and cloud computing to client PCs. Potential form factors include RDIMMs, unbuffered memory modules (UDIMMs) and compression-attached memory modules (CAMM). Source
The report provides no finalization date, launch schedule, pricing, compatibility details or benchmarks. Source
Comments