TianoCore's Oct. 22 advisory identifies CVE-2026-97631 in EDK II's PXE network-boot driver. It says an unauthenticated attacker who can deliver an ICMP error while an affected machine boots over IPv4 or IPv6 could run code before the operating system loads, and before Secure Boot or measured boot has checked any OS component. The advisory rates the flaw critical, at 9.5 out of 10.
During PXE boot, the driver copies ICMP error messages into a fixed 504-byte field. TianoCore says faulty bounds handling in both its IPv4 and IPv6 handlers lets an oversized message write beyond that field. An error addressed to the machine's IP must arrive during the PXE-boot window; the advisory says it can come from any network distance. The resulting corruption can hang the boot. To run code, an attacker must know the target firmware build and plant a counterfeit event that executes during the firmware's DXE phase.
Exposure and patch status
Ars Technica reports that systems booting solely from disk are not affected. An exposed system must use EDK II-based firmware and PXE functionality during network boot. Jesse Michael, a principal researcher at Eclypsium, told Ars that an exploit would need to be tuned to the target model, firmware version and configuration rather than work across different devices. Ars says it could not establish which device models are affected or what actions their vendors need to take.
Ars also reports that AMI published a pull request containing a code fix before a planned January disclosure. TianoCore's advisory links a patch pull request, but its patched-versions field reads “Not patched currently.” HotHardware says firmware providers still need to update their firmware. Ars advises potentially affected organizations to ask their firmware maker for guidance and consider temporarily disabling network boot if possible.
Comments