• Home
  • Technology
  • Gaming
  • Entertainment
  • World & Business
  • Science
  • Sports
  • AI
HomeTechnologyGamingEntertainmentWorld & BusinessScienceSportsAI
    • HomeTechnologyGamingEntertainmentWorld & BusinessScienceSportsAI
    • Home
    • Technology
    • Gaming
    • Entertainment
    • World & Business
    • Science
    • Sports
    • AI
    AI

    The case for five times as many new hardware and robotics founders

    A September 16, 2026 post predicts five times as many people will become hardware and robotics founders over the following 18 months, arguing that every step from design to manufacturing can be rented.

    GI
    1 Source, ,

    TLDR

    One post argues that AI design tools and outside services make it possible to rent each stage of building hardware. It points to Astra operating Blender and KiCad, Claude writing parametric design code, JLC3DP printing prototypes and JLCPCB fabricating and assembling circuit boards. For robotics, it highlights LeRobot for training in simulation and deploying to real machines. Those options underpin its September 16, 2026 forecast of five times as many people becoming hardware and robotics founders over the following 18 months.

    Combined views

    482.2K

    1 Source, first seen 14d ago

    Combined views

    482.2K

    1 Source, first seen 14d ago

    4.9K likes
    14d ago
    first seen 14d ago
    4.9K likes
    211 comments
    9K saves
    459 reposts

    Sentiment

    Positive——Negative

    Summary

    Not enough discussion yet.

    No sentiment analysis available yet.

    211 comments
    9K saves
    459 reposts

    Sentiment

    Positive——Negative

    Summary

    Not enough discussion yet.

    No sentiment analysis available yet.

    Today's Rank

    —

    Not ranked yet

    Today's Rank

    —

    Not ranked yet

    1 Source

    @gregisenbergI think we'll see 5x the number of people become hardware and robotics founders over the next 18 months Why? Because you can rent every step, from design to manufacturing: DESIGN - Astra to drive Blender, FreeCAD, and KiCad the way a person would, so you get editable geometry instead of a dead render. Zoo dot dev's text to CAD API if you want it programmatic. - Or have Claude write build123d code, which is Python parametric CAD, and there's a Claude Code plugin that runs it and exports the STL for you. PROTOTYPE - Bambu A1 mini is $299, P1S around $399 on sale. Or skip owning one, JLC3DP prints and mails it for about $20. PCBWay does resin, SLS, and CNC if plastic won't cut it. ELECTRONICS - KiCad for the board, Astra can drive it. JLCPCB fabricates and assembles, often under $100 for a small run. ESP32 for wifi, Raspberry Pi if it needs a brain. ANYTHING THAT MOVES - Unitree sells a Go2 with a full SDK for about $2,500. - Hugging Face put out a $399 open-source biped. - LeRobot gives you the whole train in sim, deploy to real pipeline, and Physical Intelligence open-sourced π0 so you're fine-tuning instead of starting from zero. - Prototype the policy in MuJoCo or Isaac Lab first. MANUFACTURING - Alibaba RFQ for the first 100 units. Check 1688 to see what the factory actually charges domestically, then negotiate. Pietra or Sourcify if you want someone to handle it. FULFILLMENT AND SELLING - ShipBob or Amazon FBA. Shopify for the store, TikTok Shop for distribution, Kickstarter if you want the money before you build it. How to think about starting your own robotics or hardware company: 1. Pick a niche that's already buying weird gear. Cyclists, tabletop gamers, beekeepers, home baristas, dog people with mobility issues. These groups spend money on specific objects and complain in public about what doesn't exist. Or grab ideas off http://Ideabrowser.com 2. Go read the complaints. Reddit, IG etc Search "I wish someone made," "does anyone make," and "modified my." That last one is the best signal, because someone already hacked the product together and you're just manufacturing what they built by hand. Also check Etsy!! If 3 sellers are doing a janky 3D printed version with 400 reviews each, the market is validated. 3. Make one. Describe it to Astra or Claude, get the CAD, print it in ugly gray PLA, use it, fix it. 4. Only go to Alibaba or similar once you've sold a few. Message 10 suppliers through RFQ, take the third cheapest, always pay the $50 for a sample before the real order. 5. Film everything from day 1. The first ugly print, the failed version, the box of 100 arriving. That's your entire marketing budget, and hardware is one of the few categories where people actually want to watch the thing get made. 6. Raise the price. Almost everyone here anchors on what the plastic cost. Your customer is comparing you to nothing, because the alternative is the product doesn't exist. Start at 5x COGS and go up. THIS GOAL OF THIS POST IS JUST HERE TO GET YOUR CREATIVE JUICES FLOWING. Of course, you can build robotics/hardware in a bunch of different ways. One thing I've learned is data couldn't be more important when you're building a hardware/robotics startups. These models learn from first person video of a human doing the task, and that footage doesn't exist for almost any job. So basically you pick one repetitive job people quit over, film someone doing it for 2 weeks, fine-tune π0 on that footage, use organic to sell the first few units and figure out scaling, 5 years ago you needed a factory, a supply chain, and a $1M just to find out if anyone wanted the thing. Now, anyone can become a hardware/robitics founder. And I suspect a lot of people will become one! Vibe manufacturers.

    1 Source

    @gregisenbergI think we'll see 5x the number of people become hardware and robotics founders over the next 18 months Why? Because you can rent every step, from design to manufacturing: DESIGN - Astra to drive Blender, FreeCAD, and KiCad the way a person would, so you get editable geometry instead of a dead render. Zoo dot dev's text to CAD API if you want it programmatic. - Or have Claude write build123d code, which is Python parametric CAD, and there's a Claude Code plugin that runs it and exports the STL for you. PROTOTYPE - Bambu A1 mini is $299, P1S around $399 on sale. Or skip owning one, JLC3DP prints and mails it for about $20. PCBWay does resin, SLS, and CNC if plastic won't cut it. ELECTRONICS - KiCad for the board, Astra can drive it. JLCPCB fabricates and assembles, often under $100 for a small run. ESP32 for wifi, Raspberry Pi if it needs a brain. ANYTHING THAT MOVES - Unitree sells a Go2 with a full SDK for about $2,500. - Hugging Face put out a $399 open-source biped. - LeRobot gives you the whole train in sim, deploy to real pipeline, and Physical Intelligence open-sourced π0 so you're fine-tuning instead of starting from zero. - Prototype the policy in MuJoCo or Isaac Lab first. MANUFACTURING - Alibaba RFQ for the first 100 units. Check 1688 to see what the factory actually charges domestically, then negotiate. Pietra or Sourcify if you want someone to handle it. FULFILLMENT AND SELLING - ShipBob or Amazon FBA. Shopify for the store, TikTok Shop for distribution, Kickstarter if you want the money before you build it. How to think about starting your own robotics or hardware company: 1. Pick a niche that's already buying weird gear. Cyclists, tabletop gamers, beekeepers, home baristas, dog people with mobility issues. These groups spend money on specific objects and complain in public about what doesn't exist. Or grab ideas off http://Ideabrowser.com 2. Go read the complaints. Reddit, IG etc Search "I wish someone made," "does anyone make," and "modified my." That last one is the best signal, because someone already hacked the product together and you're just manufacturing what they built by hand. Also check Etsy!! If 3 sellers are doing a janky 3D printed version with 400 reviews each, the market is validated. 3. Make one. Describe it to Astra or Claude, get the CAD, print it in ugly gray PLA, use it, fix it. 4. Only go to Alibaba or similar once you've sold a few. Message 10 suppliers through RFQ, take the third cheapest, always pay the $50 for a sample before the real order. 5. Film everything from day 1. The first ugly print, the failed version, the box of 100 arriving. That's your entire marketing budget, and hardware is one of the few categories where people actually want to watch the thing get made. 6. Raise the price. Almost everyone here anchors on what the plastic cost. Your customer is comparing you to nothing, because the alternative is the product doesn't exist. Start at 5x COGS and go up. THIS GOAL OF THIS POST IS JUST HERE TO GET YOUR CREATIVE JUICES FLOWING. Of course, you can build robotics/hardware in a bunch of different ways. One thing I've learned is data couldn't be more important when you're building a hardware/robotics startups. These models learn from first person video of a human doing the task, and that footage doesn't exist for almost any job. So basically you pick one repetitive job people quit over, film someone doing it for 2 weeks, fine-tune π0 on that footage, use organic to sell the first few units and figure out scaling, 5 years ago you needed a factory, a supply chain, and a $1M just to find out if anyone wanted the thing. Now, anyone can become a hardware/robitics founder. And I suspect a lot of people will become one! Vibe manufacturers.