Definitive Guide to setting up the Linksys SPA-3102 with trixbox/FreepBX

voipspeak.net — Lots of people seem to have trouble setting these cool devices up so Kerry at VOIPSpeak.net has done another article that is aimed at people without much experience with the devices and/or FreePBX and trixbox. With simple explainations and screenshots, anyone should be able to setup an SPA-3102 now. Mar 30, 2007 View in Crawl 4

Save
Bury

5 Comments

efbatey Apr 2, 2007

0 diggs
-0 / +0

Show Buried Comment
Report

Digg
Bury

Followed it all and alas trying to dial out OB Route .. got "All Circuits are BUSY Now .. Please try your call again later". Must be some more not in the article ...

regrafix Apr 4, 2007

0 diggs
-0 / +0

Show Buried Comment
Report

Digg
Bury

The Tuturial is one the better ones out there but the guide is incomplete is some some things missing like bridging the router and such Follow the following steps and it should work fine. Under "Router ---> WAN Setup" (advanced screen, admin mode): 1. Set "Internet Connection Setting" to 'Static IP'. 2. Under "Remote Management", set 'Enable WAN Web Server' to 'Yes'. THIS IS IMPORTANT 3. Under "Static IP Settings", set your IP address for te SPA to value that is not in conflict with the address range of your DHCP server. Set the gateway address to that of your main home router. Under "Router --->Lan Setup" (advanced screen, admin mode): 1. Set "networking Service" to 'Bridge' 2. Set "enable DHCP Server" to 'No'. Leave other settings unchanged Under "Voice ---> System" (advanced screen, admin mode): 1. Set "Enable Web Admin" to 'Yes' 2. Set your admin and user passwords. Under "Voice --> Regional" (advanced screen, admin mode): [This is only for North American Users] 1. Set "CallerID Method" to 'Bellcore (N. America, China)'. 2. Set "Caller ID FSK Standard" to 'Bell 202'. Under "Voice --> Line 1" (advanced screen, admin mode): [NOTE: Line 1 refers to the SIP account associated with the FXS port of the SPA] 1. Set "Line Enable" to 'Yes' (if you wish to use the FXS port to connect an analog phone) 2. Under "SIP Settings", set "SIP Port" to 5064 3. Under "Proxy and Registration", set "Proxy" to , set "Use Outbound Proxy" to 'No', "Register" to 'yes', "Register Expires" to '3600' (or whatever you feel like). 4. Under "Subscriber Information", Set "Display Name" to ''your_name', and set the user name and password for the SIp account for the phone attached to the FXS port 5. Under "Audio Configuration", "DTMF Tx Method" = "Info" seems to work for me. 6. Under "VoIP Fallback To PSTN", Set "Auto PSTN Fallback" to 'Yes'. 7. Under "Dial PLan", set dial plan to: Code: L:6,S:3,(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.) Hopefully Kerry Sees this and updates the instuctions his guides are very good.

r3g1st3r1tsfr33 May 8, 2007